Ultimate Guide: How to Clean an Ebike for Peak Performance

Juggernaut FS XD MTB cover image

Keeping your electric bike clean is not just about looks. It's a key part of bike care. It can help it last longer and run well. 

You ride through city streets, country paths, or rugged trails. Your e-bike is bound to pick up dirt and grime. All that buildup wears down its parts faster. It can also hurt your bike's performance. 


Today, we'll walk you through the proper steps to take care of your electric bike, from the best pre-wash practices to recommended post-cleaning finishing touches. 

Biktrix Pre-cleaning Procedure

Before you start scrubbing and rinsing your Biktrix bike (or another e-bike you have), there are a few important things to do that will protect its electrical system and make cleaning easier. 

Power Down and Remove the Battery

Always turn off your e-bike and remove the battery. This step not only ensures your safety but also protects the electrical components from potential water damage. If you remove the battery, make sure it's turned off and the battery compartment sealed off as best as possible.

Take Off Electronic Accessories

Remove any electronic accessories or displays that can be removed from the bike. If you can't remove these parts, cover them with waterproof material.

Best thing!

This will keep them dry during cleaning. It's also wise to remove any removable parts, like water bottles or bags.

Pick the Right Spot

Choose a cleaning area away from direct sunlight, which can speed up the drying of soap and leave spots or streaks on your bike.

Your driveway, garage, or any shaded, open space works well. Also, make sure you have a water source and enough room to maneuver around your bike.

Gather Your Cleaning Supplies

Having the right tools on hand before you start will make the cleaning process more efficient and effective. Here's a simple list of the supplies you'll need:

  • Soft brush and sponges: A soft brush is great for general cleaning and reaching into the bike's nooks. Use sponges for gentler surfaces to avoid scratches.
  • Bucket: Fill with warm water. You'll use this to mix soap and rinse your tools.
  • Mild soap or bike-specific cleaner: A gentle bike cleaner will help break down the dirt without damaging the paint or parts.
  • Hose with a gentle spray nozzle: A gentle stream of water is useful for rinsing off your bike without harming sensitive areas.
  • Clean, dry cloths: You'll need these for drying your e-bike after washing.
  • Chain lubricant: After cleaning, you'll need to re-lubricate the chain to keep it running smoothly.
  • Rubber gloves: Optional, but they can help keep your hands clean and protect them from any harsh cleaners.

Note: Do not use a pressure washer or strong chemical cleaners, as they can be too harsh on your bike's electricals and finish.

The 5-Step Cleaning Process

Cleaning your e-bike is similar to cleaning a standard bicycle but with extra care for the electronic parts. This step-by-step guide to help you clean your Biktrix e-bike with ease:

1. Rinse Off Loose Dirt

Begin by gently rinsing your bike with a garden hose set to a soft spray. This helps wash away loose dirt that can scratch the paint when scrubbing. Avoid spraying water directly into any electrical components or bearings.

2. Apply Soap

Prepare a bucket of warm water mixed with mild soap, then dip a sponge or soft bristle brush into the solution. Starting from the top of the bike and working your way down, gently scrub the bike frame and parts to remove dirt. If the wheels and tires are particularly muddy or dirty, use a different brush.

3. Clean Sensitive Areas Carefully

The chain, gears, and derailleur need attention, but be gentle and precise. Use a small brush to remove grime from the chain while turning the pedals backward. To prevent rusting, avoid using a hose or lots of water on these parts.

4. Handle the Electronic Components with Care

Wipe down the battery case, motor, and display (if it can't be removed) with a slightly damp cloth. Never soak these parts or let water drip into the openings.

5. Rinse Your Ebike

Using the hose with a soft spray setting, rinse the soap off your bike, starting from the top. Make sure to remove all suds to prevent soap scum from drying on the surface. Again, be cautious around the electrical parts — use just enough water to get the job done.

After a thorough rinse, it's crucial to dry your e-bike properly to avoid rust and water damage.


Drying Your Ebike

Properly drying your e-bike is just as important as the washing part. It prevents rust, keeps your components in good working order, and ensures that no water remains in sensitive areas. Here are some tips to help you do it right:

Use Clean Cloths

Take one or more dry cloths and gently wipe down the entire bike. Absorb as much water as possible, paying special attention to areas where water might collect, such as under the saddle, around the bottom bracket, and in any frame crevices.

Let it air-dry

After wiping it down, let the bike sit in a well-ventilated area to air dry completely. If possible, leave it in a warm area without direct sunlight. Avoid leaving it in damp or humid conditions, as this could lead to rust.

Give It a Shake

Sometimes, water gets trapped in the frame or components. Gently lift and shake the bike or tilt it to different angles to encourage any trapped water to come out.

Touch Up with a Dry Cloth

Once the bike has air-dried, go over it one more time with a dry microfiber cloth to pick up any moisture you may have missed. This is a good time to inspect the bike for any areas that need extra attention or may have been overlooked.

Post-Cleaning Care

Follow these steps to help ensure that your bike is clean, well-maintained, and ready to get back on the road. 

Reattach the Battery and Electronics

Once you're confident that the bike is completely dry, you can reattach the battery. Make sure the contacts are dry and clean for a good connection. Also, reattach any displays or removable electronics you took off before cleaning.

Lubricate the Chain

A clean chain is great, but it needs lubrication to run smoothly and quietly. Apply a suitable chain lubricant sparingly to each link while slowly rotating the pedals in reverse. Wipe away any excess to prevent attracting dirt.

Check and Adjust Tire Pressure 

Your tires could lose some air over time, and it's a good habit to check their pressure after you clean your bike. Inflate the tires to the recommended pressure indicated on the tire sidewall for optimal performance.

Give It a Test

Before heading out on your next ride, turn on your e-bike and give it a quick test to make sure everything is working as it should. Check the brakes, shifting, and electric assist to ensure they are all functioning correctly.

juggernaut xd duo parts

Electric Bike Maintenance Tips

Regular cleaning is part of good e-bike maintenance, but there's more you can do to keep your electric bike in top condition. Here are a few tips to help your e-bike last longer and perform at its best:

  • Perform regular check-ups: Set up a schedule to check the electrical system, brakes, tires, and drivetrain for wear and tear. This can help you spot issues early and prevent them from becoming bigger problems.
  • Store your bike properly: Store your e-bike in a dry, secure place away from harsh temperatures. Extreme cold or heat can affect the battery health and the longevity of your bike's components.
  • Professional service: Although many maintenance tasks can be done at home, we recommend having your e-bike checked by a professional once a year. They can perform a detailed inspection and handle any complex issues that you might not be equipped to solve.
  • Keep an eye on the battery: Your e-bike's battery is key to its performance. Regularly check it for any signs of damage and keep it charged according to the manufacturer's recommendations. Avoid running the battery completely flat, and don't leave it to charge overnight or for extended periods.

Frequently Asked Questions

How Often Should I Clean My E-bike?

Regular cleaning is recommended, especially if you ride in muddy or dusty conditions. At a minimum, give your bike a thorough clean every few weeks or after rides in wet conditions.

What Should I Do if Water Gets Into the Electrical Parts?

If water accidentally gets into the electrical parts, disconnect the battery, dry the components as much as possible, and let the bike air dry completely before reassembling and turning it on.

Is It Safe to Use Household Cleaners on My E-bike?

Many household cleaners can be too harsh for your bike and might damage the paint or finishes. It's safer to use a mild soap or a cleaner specifically designed for bikes.

How Can I Protect My E-bike’s Finish?

Applying a bike polish or wax after cleaning can help protect the finish and make future washes easier by repelling dirt and water.

What’s the Best Way to Lubricate My Chain After Cleaning?

Apply a bike-specific chain lubricant to each link while turning the pedals. Then, wipe off any excess to avoid attracting dirt.

Elevate Your E-Bike Care With Biktrix

Regularly cleaning your e-bike is recommended as part of bike care because it keeps it looking great and preserves the function and integrity of all its parts. 

By incorporating these simple cleaning and maintenance routines into your schedule, you ensure that every ride is safe, smooth, and enjoyable. Proper care of your e-bike also means less money spent on repairs and a longer life for your electric steed.

For more information and resources on how to take care of your electric bike and ensure peak performance, visit us at Biktrix.com

At Biktrix, you’ll find everything from the best deals on electric bikes to a community of electric bike enthusiasts. Join us at Biktrix to unlock a world of e-bike resources. 

Latest Articles

View All
Juggernaut XD Eagle Cover

How to Charge Your E-bike?

Learn how to charge your e-bike correctly to protect your investment and avoid issues like overheating, battery damage, and other serious issues.

Ebike for Heavy Riders

7 Best Ebike for Heavy Riders

Sometimes, you need more power capacity on your eBike, both for your weight and extra luggage. See what the best eBike for heavy riders is in 2024.